Dryrod Damp-Proofing Rods (Rising Damp & Salt Damage):

Fast, Clean and Effective Damp-Proofing with Dryrod®.

Dryrod Damp-Proofing Rods (Rising Damp & Salt Damage).

Fast, Clean and Effective Damp-Proofing with Dryrod®.

Dryrod Damp-Proofing Rods is a state-of-the-art treatment for rising damp. Besides the high level of performance, it is a quicker installation than any other rising damp treatment on the market. Dryrods are 180 mm in length, 12 mm in diameter grooved fibre rods containing a powerful water repellent. The Dryrod delivery system guarantees the correct dose of active ingredient is delivered to the wall every time thereby permanently eradicating rising damp. The rods are inserted into 12 mm pre-drilled holes along the mortar lines of a building. The water-repellent material diffuses deeply into the damp masonry, curing to form a highly effective barrier to damp. This results in a damp-proof course which stops further rising damp from occurring and helps the wall to dry out. 

Dryrod Rods create the best possible barrier to rising damp thereby minimising moisture in the wall, blocking the build-up of ground salts, and reducing heat loss.

Damp-Proofing Rods Features & Benefits:

Dryrod outperforms all tested competitor products like creams, gels or liquids and is the most effective method of rising damp treatment available.
Fast & Simple to Install DIY rising damp treatment, all that is required is to drill holes in a continuous mortar course and insert the required number of damp-proofing rods.
Permanent eradication of rising damp as the active ingredient within the rods spreads through, and bonds with the mortar in a wall, providing a permanent solution to rising damp.

No specialist equipment is required and only standard tools are required.

No chemical mess to clean up as it is conveniently foil-wrapped packaging and a simple installation procedure means no spillages.

Delivers the correct dose every time as each rod is accurately dosed with exactly the correct amount of water-repellent eliminating guesswork.

The High-Performance DPC Treatment is Certified to be effective against the ingress of moisture for at least 20 years.
Proven to work on highly-saturated walls, even up to 95% saturation, tests show that Dryrod Damp-Proofing Rods outperform even premium damp-proofing creams at high saturation levels.
It is a low-hazard waterproofing product as Dryrod Damp-Proofing Rods are solvent-free, odour free and non-caustic.

 Dryrod Rods create the best possible barrier to rising damp thereby minimising moisture in the wall, blocking the build-up of ground salts, and reducing heat loss.

Dryrod Product Properties:

Dryrod Damp-Proofing Rods are effective in a wide range of conditions, including:

Saturated walls (up to 95% saturation)
Low alkalinity mortar
High alkalinity mortar
Low porosity mortar
High porosity mortar
Lime-based mortar
Cement-based mortar
Cold or warm (it can be used in freezing conditions)

Treating Walls of Varying Thicknesses With Damp-Proofing Rods.

Rising damp and salt damage to walls.

It is not enough to paint over the damp with specialised waterproofing paints or flake off the salt however for long-lasting effective measures against rising dampness and salt is to create a barrier to prevent the dampness rising up the in the internal masonry, whether it is old mortar/masonry found in older buildings or cavity walls, rubble infill, random stone and/or single-skin walls. Damp-Proofing Rods are an effective treatment utilising deep penetration prevention alongside proven spread giving a complete rising damp and salt damage treatment every time. It is a simple application as all you need to do is just drill and insert the damp proofing rods into the affected wall.

Low-hazard, non-caustic, non-flammable, and solvent-free rising damp and salt damage solution.
Durability — the product will remain effective against rising damp for at least 20 years.

Dryzone Dryrod System Cutting Tool.

Dryzone System Cutting Tool has 2 blades. One small pointed blade is used to scratch and cut open the plug on Dryzone mastic cartridges, and a rectangular guillotine blade, which is ideal for cutting Dryrod Damp-Proofing Rods to size. The Dryrod Cutting Tool has a protective cap for the pointed blade and the guillotine blade is safely stored within the body, which ensures the cutter is safe to transport

Dryzone Crème Applicator/Injection Gun (600ml Foil Cartridges).

Dryzone System Cream Injection Gun is specifically for use with 600ml foil packs of Dryzone DPC Cream. The cartridges are pierced and then placed inside the tube of the gun. Pressing the trigger will cause the Dryzone to move out of the nozzle, enabling the injection of the DPC cream in pre-drilled holes in the mortar course.

The Dryzone System Cream Injection Gun is re-usable and easily cleanable.

Dryrod Damp-Proofing Rods Data Sheets. Click here. 

Where can I buy Dryrod Damp-Proofing Rods? 

Dryrod Damp-Proofing Rods (Rising Damp & Salt Damage). Dryrod Damp-Proofing Rods is a state-of-the-art treatment for rising damp.

Midas Paints Tygervalley 021 910 0134
64-70 Edward Street, Tygervalley, Bo Oakdale, Cape Town, 7530.
4J8P+H2 Bellville, Cape Town

Midas Paints Strand Somerset West 021 851 0913
7 Henry Vos Cl, Asla Park, Cape Town, 7140
VVV4+R9 Strand, Cape Town

Midas Pains Paarl 021 879 5095
41 Main Rd, Paarl, Cape Town, 7646
6XM6+W9 Paarl

Winter Worries? Leaky Roofs and Damp Walls Have Met Their Match!

Midas Paints Strand Somerset West

BORN OUT OF PASSION. MASTERED THROUGH TRADITION

Midas Paints Strand Somerset West
7 Henry Vos Cl, Asla Park, Cape Town, 7140
Google Code VVV3+WM Strand, Cape Town
-33.76463329801787, 18.96255239828295

Call Midas Paints Strand Somerset West now  021 851 0913